two gel blaster guns

How to Fix a Gel Blaster That Won’t Shoot

3 minutes, 57 seconds Read

How to Fix a Gel Blaster That Won’t Shoot. Gel blasters are popular leisure devices that provide hours of excitement and fun. However, they, like any mechanical equipment, can encounter problems. One of the most typical issues is a gel blaster that refuses to shoot. We’ll walk you through a step-by-step method to troubleshoot and repair your gel blaster, so you can get back to blasting gel balls in no time.

Assessing the Issue

Before beginning any repairs, it is critical to first understand the problem. This is how you can verify:

Check the battery:

Check that your gel blaster has adequate battery juice to function. Connect the battery to the charger and charge it completely. Additionally, ensure that the battery is correctly attached to the blaster.

Examine the magazine:

Examine the magazine for any clogs or jams. Remove it from the blaster and double-check that the gel balls are properly filled. Improper loading can sometimes cause feeding issues and prevent the blaster from firing.

Inspect the barrel:

Examine the bottom of the barrel for any blockages, debris, or gel balls that may be blocking the route. If needed, use a flashlight. If you find any blockages, proceed to the following phase to clean the barrel. How to Clean Your Gel Blaster

Basic Troubleshooting Steps

Firstly, Let’s move on to some basic troubleshooting techniques now that you’ve recognized probable issues:

Clean the barrel:

If you discovered any obstacles or debris in the barrel, it is critical that you properly clean it. Gently remove them with a cleaning rod or a tiny brush. Check the barrel for any dirt or residue that could obstruct the gel ball’s route. Wipe the interior of the barrel with a soft cloth wet with water or isopropyl alcohol.

Lubricate the gearbox:

Inadequate lubrication might cause the gears to seize, resulting in shooting issues. Apply a tiny amount of silicone-based lubricant to the gearbox as directed by the manufacturer. Excess oil can attract dust and debris, so avoid over-lubricating. Lubrication ensures smooth gear movement and improves blasting performance. How to Fix a Gel Blaster That Won’t Shoot

Check the hop-up system:

The hop-up device is in charge of giving the gel balls spin, which improves their accuracy. Inspect the hop-up unit and make sure it is properly adjusted. It can impact the blaster’s performance if it is adjusted too low or too high. Experiment with various settings until you find the best balance of range and precision. What Gel Blaster Hurts the Most?

Advanced Troubleshooting Steps


If the simple troubleshooting measures did not resolve the problem, it is necessary to try more complex techniques:

Examine the gearbox:

Remove the gearbox from the gel blaster.

Check the gears for signs of cracking or wear. Examine the gears for broken teeth or excessive wear. You need to replace them if you discover any issues. For gear replacement, consult the manufacturer’s instructions or seek expert assistance. To maintain optimum operation, it is critical to utilize compatible and high-quality replacement parts.

Check the battery connections:

Loose battery connections can sometimes prevent the gel blaster from firing. Ascertain that all electrical connections between the battery and the blaster are secure. Clean the connectors if necessary to remove any rust or dirt buildup. Power transfer to the blaster’s internal components will be adequate if the connection is strong and clean. How to choose the Best Gel Blaster

Inspect the motor:

The gel balls are propelled by the motor handles. Shooting issues can arise if the motor is not functioning properly. Check the connections on the motor to make sure they are secure. The motor has to be replaced if it appears to be broken or burned out. For motor replacement or repair, consult the manufacturer or seek expert assistance.

Seeking Professional Help

If you’ve tried all troubleshooting options without success, it’s time to seek expert assistance. Consider contacting a gel blaster professional or the manufacturer of your blaster for expert advice. They have the knowledge and experience to identify complex problems and offer unique solutions. They can also bring your gel blaster back to life without inflicting further damage. How Does a Gel Blaster Work?


Fixing a non-shooting gel blaster can be a frustrating experience, but with the appropriate troubleshooting methods, you can frequently cure the problem on your own. Begin by diagnosing the problem and carrying out basic troubleshooting procedures such as cleaning the barrel and lubricating the gearbox. If the problem persists, try more advanced approaches such as inspecting the gears and checking the motor. Remember that getting professional assistance is always an option if necessary. You’ll have your gel blaster back in working order in no time, ready to enjoy numerous hours of gel ball blasting pleasure.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *